Grid
List
Show
Add to wishlist
Quick View

Classic Retrofit Basin Tap Set WELS 5 Star 5.5L/min

AUD$93.45 – AUD$162.00

Easily adaptable to any existing plumbing!

WELS 5 Star Rating / 5.5 litres per minute / T09521 / 2800.02 Stylish and durable tapware you can install yourself! It’s important to know that not all tapware is interchangeable. With all other tapware major pipe work is often required. Our EZYFIX taps will adapt to the old and new taps manufactured by Dorf, Caroma, Irwell and even the old deep seated Donson taps to name but a few. This is because with EZYFIX tapware no pipework is required at all, thanks to our innovative adaptors and extenders. Simply unscrew your old taps and screw in our new EZYFIX taps. EZYFIX Guaranteed to fit. DIY Universal Retro-Fit Tapware - If you can change a tap washer, you can install EZYFIX. This tap set is also available in White and Ivory. Download the below information PDF's Register your product here DISMANTLING YOUR OLD TAPWARE
  • Turn off water at mains.
  • Remove the sink/basin spout by undoing the brass or plastic spout fixing nut (A) under your basin, then rotate and pull the spout up.
  • Remove all items on top of your sink/basin (hot and cold buttons, handles, bonnets with spindles, jumper valves and any other fixtures but not the actual tap bodies or water pipes).
INSTALLING THE NEW EZYFIX TAPS
  • Check the new spindle for the correct length by comparing it with the old spindle you removed. Use the spindle extension to make up the difference if necessary.
  • Fit the new top assembly as shown in the diagram, making sure the fibre washer is positioned underneath the bonnet, and the jumper valve is placed into position.
  • Screw the tap flange onto the bonnet.
  • You can now install your tap handle and hot/cold button.
THE NEW EZYFIX SPOUT ASSEMBLY
  • Look at the thread on the end of the old spout neck: pick your new nipple where the long thread is identical, and screw it onto the end of the new spout neck, using thread tape included to make a waterproof seal.
INSTALLATION
  • Push the new spout assembly onto the existing nipple, using a small amount of soapy water or cooking oil for lubrication. Finally, tighten the new spout assembly to the sink/basin using the brass or plastic spout fixing nut (A).
  • Turn taps
 
Select options This product has multiple variants. The options may be chosen on the product page
Add to wishlist
Quick View

Gold-Chrome Basin Set

AUD$133.00

Easily adaptable to any existing plumbing!

WELS 5 Star Rating / 5.5 litres per minute / T09521 / 2800.21a Stylish and durable tapware you can install yourself! It’s important to know that not all tapware is interchangeable. With all other tapware major pipe work is often required. Our EZYFIX taps will adapt to the old and new taps manufactured by Dorf, Caroma, Irwell and even the old deep seated Donson taps to name but a few. This is because with EZYFIX tapware no pipework is required at all, thanks to our innovative adaptors and extenders. Simply unscrew your old taps and screw in our new EZYFIX taps. EZYFIX Guaranteed to fit. DIY Universal Retro-Fit Tapware - If you can change a tap washer, you can install EZYFIX. This tap set is also available in White, Ivory,Matte-Black & Chrome. Download the below information PDF's Register your product here DISMANTLING YOUR OLD TAPWARE
  • Turn off water at mains.
  • Remove the sink/basin spout by undoing the brass or plastic spout fixing nut (A) under your basin, then rotate and pull the spout up.
  • Remove all items on top of your sink/basin (hot and cold buttons, handles, bonnets with spindles, jumper valves and any other fixtures but not the actual tap bodies or water pipes).
INSTALLING THE NEW EZYFIX TAPS
  • Check the new spindle for the correct length by comparing it with the old spindle you removed. Use the spindle extension to make up the difference if necessary.
  • Fit the new top assembly as shown in the diagram, making sure the fibre washer is positioned underneath the bonnet, and the jumper valve is placed into position.
  • Screw the tap flange onto the bonnet.
  • You can now install your tap handle and hot/cold button.
THE NEW EZYFIX SPOUT ASSEMBLY
  • Look at the thread on the end of the old spout neck: pick your new nipple where the long thread is identical, and screw it onto the end of the new spout neck, using thread tape included to make a waterproof seal.
INSTALLATION
  • Push the new spout assembly onto the existing nipple, using a small amount of soapy water or cooking oil for lubrication. Finally, tighten the new spout assembly to the sink/basin using the brass or plastic spout fixing nut (A).
  • Turn taps
 
Add to basket
Add to wishlist
Quick View

Ivory- Gold Basin Set

Easily adaptable to any existing plumbing!

WELS 5 Star Rating / 5.5 litres per minute / T09521 / 2800.41 Stylish and durable tapware you can install yourself! It’s important to know that not all tapware is interchangeable. With all other tapware major pipe work is often required. Our EZYFIX taps will adapt to the old and new taps manufactured by Dorf, Caroma, Irwell and even the old deep seated Donson taps to name but a few. This is because with EZYFIX tapware no pipework is required at all, thanks to our innovative adaptors and extenders. Simply unscrew your old taps and screw in our new EZYFIX taps. EZYFIX Guaranteed to fit. DIY Universal Retro-Fit Tapware - If you can change a tap washer, you can install EZYFIX. This tap set is also available in White-Gold ,Ivory-Gold,Chrome-Gold & Gold. Download the below information PDF's Register your product here DISMANTLING YOUR OLD TAPWARE
  • Turn off water at mains.
  • Remove the sink/basin spout by undoing the brass or plastic spout fixing nut (A) under your basin, then rotate and pull the spout up.
  • Remove all items on top of your sink/basin (hot and cold buttons, handles, bonnets with spindles, jumper valves and any other fixtures but not the actual tap bodies or water pipes).
INSTALLING THE NEW EZYFIX TAPS
  • Check the new spindle for the correct length by comparing it with the old spindle you removed. Use the spindle extension to make up the difference if necessary.
  • Fit the new top assembly as shown in the diagram, making sure the fibre washer is positioned underneath the bonnet, and the jumper valve is placed into position.
  • Screw the tap flange onto the bonnet.
  • You can now install your tap handle and hot/cold button.
THE NEW EZYFIX SPOUT ASSEMBLY
  • Look at the thread on the end of the old spout neck: pick your new nipple where the long thread is identical, and screw it onto the end of the new spout neck, using thread tape included to make a waterproof seal.
INSTALLATION
  • Push the new spout assembly onto the existing nipple, using a small amount of soapy water or cooking oil for lubrication. Finally, tighten the new spout assembly to the sink/basin using the brass or plastic spout fixing nut (A).
  • Turn taps
 
Read more
Add to wishlist
Quick View

Matte Black – Gold Basin Set

AUD$162.00

Easily adaptable to any existing plumbing!

WELS 5 Star Rating / 5.5 litres per minute / T09521 / 2800.02 Stylish and durable tapware you can install yourself! It’s important to know that not all tapware is interchangeable. With all other tapware major pipe work is often required. Our EZYFIX taps will adapt to the old and new taps manufactured by Dorf, Caroma, Irwell and even the old deep seated Donson taps to name but a few. This is because with EZYFIX tapware no pipework is required at all, thanks to our innovative adaptors and extenders. Simply unscrew your old taps and screw in our new EZYFIX taps. EZYFIX Guaranteed to fit. DIY Universal Retro-Fit Tapware - If you can change a tap washer, you can install EZYFIX. This tap set is also available in White-Gold ,Ivory-Gold,Chrome-Gold & Gold. Download the below information PDF's Register your product here DISMANTLING YOUR OLD TAPWARE
  • Turn off water at mains.
  • Remove the sink/basin spout by undoing the brass or plastic spout fixing nut (A) under your basin, then rotate and pull the spout up.
  • Remove all items on top of your sink/basin (hot and cold buttons, handles, bonnets with spindles, jumper valves and any other fixtures but not the actual tap bodies or water pipes).
INSTALLING THE NEW EZYFIX TAPS
  • Check the new spindle for the correct length by comparing it with the old spindle you removed. Use the spindle extension to make up the difference if necessary.
  • Fit the new top assembly as shown in the diagram, making sure the fibre washer is positioned underneath the bonnet, and the jumper valve is placed into position.
  • Screw the tap flange onto the bonnet.
  • You can now install your tap handle and hot/cold button.
THE NEW EZYFIX SPOUT ASSEMBLY
  • Look at the thread on the end of the old spout neck: pick your new nipple where the long thread is identical, and screw it onto the end of the new spout neck, using thread tape included to make a waterproof seal.
INSTALLATION
  • Push the new spout assembly onto the existing nipple, using a small amount of soapy water or cooking oil for lubrication. Finally, tighten the new spout assembly to the sink/basin using the brass or plastic spout fixing nut (A).
  • Turn taps
 
Add to basket
Add to wishlist
Quick View

Matte Black Basin Set

AUD$133.00

Easily adaptable to any existing plumbing!

WELS 5 Star Rating / 5.5 litres per minute / T09521 / 2800.25 Stylish and durable tapware you can install yourself! It’s important to know that not all tapware is interchangeable. With all other tapware major pipe work is often required. Our EZYFIX taps will adapt to the old and new taps manufactured by Dorf, Caroma, Irwell and even the old deep seated Donson taps to name but a few. This is because with EZYFIX tapware no pipework is required at all, thanks to our innovative adaptors and extenders. Simply unscrew your old taps and screw in our new EZYFIX taps. EZYFIX Guaranteed to fit. DIY Universal Retro-Fit Tapware - If you can change a tap washer, you can install EZYFIX. This tap set is also available in White and Ivory. Download the below information PDF's Register your product here DISMANTLING YOUR OLD TAPWARE
  • Turn off water at mains.
  • Remove the sink/basin spout by undoing the brass or plastic spout fixing nut (A) under your basin, then rotate and pull the spout up.
  • Remove all items on top of your sink/basin (hot and cold buttons, handles, bonnets with spindles, jumper valves and any other fixtures but not the actual tap bodies or water pipes).
INSTALLING THE NEW EZYFIX TAPS
  • Check the new spindle for the correct length by comparing it with the old spindle you removed. Use the spindle extension to make up the difference if necessary.
  • Fit the new top assembly as shown in the diagram, making sure the fibre washer is positioned underneath the bonnet, and the jumper valve is placed into position.
  • Screw the tap flange onto the bonnet.
  • You can now install your tap handle and hot/cold button.
THE NEW EZYFIX SPOUT ASSEMBLY
  • Look at the thread on the end of the old spout neck: pick your new nipple where the long thread is identical, and screw it onto the end of the new spout neck, using thread tape included to make a waterproof seal.
INSTALLATION
  • Push the new spout assembly onto the existing nipple, using a small amount of soapy water or cooking oil for lubrication. Finally, tighten the new spout assembly to the sink/basin using the brass or plastic spout fixing nut (A).
  • Turn taps
 
Add to basket
Add to wishlist
Quick View

White – Gold Basin Set

AUD$162.00

Easily adaptable to any existing plumbing!

WELS 5 Star Rating / 5.5 litres per minute / T09521 / 2800.02 Stylish and durable tapware you can install yourself! It’s important to know that not all tapware is interchangeable. With all other tapware major pipe work is often required. Our EZYFIX taps will adapt to the old and new taps manufactured by Dorf, Caroma, Irwell and even the old deep seated Donson taps to name but a few. This is because with EZYFIX tapware no pipework is required at all, thanks to our innovative adaptors and extenders. Simply unscrew your old taps and screw in our new EZYFIX taps. EZYFIX Guaranteed to fit. DIY Universal Retro-Fit Tapware - If you can change a tap washer, you can install EZYFIX. This tap set is also available in White-Gold ,Ivory-Gold,Chrome-Gold & Gold. Download the below information PDF's Register your product here DISMANTLING YOUR OLD TAPWARE
  • Turn off water at mains.
  • Remove the sink/basin spout by undoing the brass or plastic spout fixing nut (A) under your basin, then rotate and pull the spout up.
  • Remove all items on top of your sink/basin (hot and cold buttons, handles, bonnets with spindles, jumper valves and any other fixtures but not the actual tap bodies or water pipes).
INSTALLING THE NEW EZYFIX TAPS
  • Check the new spindle for the correct length by comparing it with the old spindle you removed. Use the spindle extension to make up the difference if necessary.
  • Fit the new top assembly as shown in the diagram, making sure the fibre washer is positioned underneath the bonnet, and the jumper valve is placed into position.
  • Screw the tap flange onto the bonnet.
  • You can now install your tap handle and hot/cold button.
THE NEW EZYFIX SPOUT ASSEMBLY
  • Look at the thread on the end of the old spout neck: pick your new nipple where the long thread is identical, and screw it onto the end of the new spout neck, using thread tape included to make a waterproof seal.
INSTALLATION
  • Push the new spout assembly onto the existing nipple, using a small amount of soapy water or cooking oil for lubrication. Finally, tighten the new spout assembly to the sink/basin using the brass or plastic spout fixing nut (A).
  • Turn taps
 
Add to basket
Add to wishlist
Quick View

White-Chrome Basin Set

AUD$133.00

Easily adaptable to any existing plumbing!

WELS 5 Star Rating / 5.5 litres per minute / T09521 / 2800.02 Stylish and durable tapware you can install yourself! It’s important to know that not all tapware is interchangeable. With all other tapware major pipe work is often required. Our EZYFIX taps will adapt to the old and new taps manufactured by Dorf, Caroma, Irwell and even the old deep seated Donson taps to name but a few. This is because with EZYFIX tapware no pipework is required at all, thanks to our innovative adaptors and extenders. Simply unscrew your old taps and screw in our new EZYFIX taps. EZYFIX Guaranteed to fit. DIY Universal Retro-Fit Tapware - If you can change a tap washer, you can install EZYFIX. This tap set is also available in White, Ivory,Matte-Black & Chrome. Download the below information PDF's Register your product here DISMANTLING YOUR OLD TAPWARE
  • Turn off water at mains.
  • Remove the sink/basin spout by undoing the brass or plastic spout fixing nut (A) under your basin, then rotate and pull the spout up.
  • Remove all items on top of your sink/basin (hot and cold buttons, handles, bonnets with spindles, jumper valves and any other fixtures but not the actual tap bodies or water pipes).
INSTALLING THE NEW EZYFIX TAPS
  • Check the new spindle for the correct length by comparing it with the old spindle you removed. Use the spindle extension to make up the difference if necessary.
  • Fit the new top assembly as shown in the diagram, making sure the fibre washer is positioned underneath the bonnet, and the jumper valve is placed into position.
  • Screw the tap flange onto the bonnet.
  • You can now install your tap handle and hot/cold button.
THE NEW EZYFIX SPOUT ASSEMBLY
  • Look at the thread on the end of the old spout neck: pick your new nipple where the long thread is identical, and screw it onto the end of the new spout neck, using thread tape included to make a waterproof seal.
INSTALLATION
  • Push the new spout assembly onto the existing nipple, using a small amount of soapy water or cooking oil for lubrication. Finally, tighten the new spout assembly to the sink/basin using the brass or plastic spout fixing nut (A).
  • Turn taps
 
Add to basket

Universal taps for every fit and need!

The EZYFIX Modern Lever tapware for your bathroom or laundry is the easiest way to update your home. With a modern style, solid brass construction, 3/4 turn lever offering ‘smooth-glide’ flow and temperate control, you can add your own style to your home. Modern Lever has a three-quarter turn design, which offers you a more precise temperature and water flow control than the common quarter-turn taps on the market. This bathroom tapware is especially beneficial when showering in wintertime. The flow is ideal and you will not have to spend the first five minutes of your shower time adjusting the level to find the perfect temperature. The thought of changing your tapware used to be off-putting, because of the amount of plumbing and ‘behind-the-scenes’ work involved. This is usually the case, because not all tapware is compatible with your existing plumbing, which requires major pipework. However, EZYFIX products are specifically designed to adapt to any existing tapware. Our products are not only easy to install, but also easy to operate.
  • Our Modern Lever tapware range includes: Sink sets, basin sets, multi-fit assemblies, wall assemblies, bath sets, washing machine taps and classic-style tapware.
All you need is a basic tool kit and half an hour of your time.

© EZYFIX Tapware, 2021 | Created by Retail Return Marketing Solutions


Privacy Policy

Home
Shop
0 Wishlist
More
More