Grid
List
Show
Add to wishlist
Lever Bath Taps Set
Quick View

Lever Bath Taps Set

AUD$149.00

Upgrade your wall-mounted bath taps to modern ceramic disc technology.

Ideal for supply of water to your bath or spa. This outlet provides a reach of 165mm from the wall. Contemporary and durable tapware that’s quick and easy to install Often the plumbing in your wall can be uneven or previous renovations have simply added extra layers of render and tile leaving you with deeply recessed plumbing.. With EZYFIX tapware our black pvc threaded extenders included in the pack often help to overcome this challenge. Simply unscrew your old taps and screw in our new EZYFIX taps. EZYFIX Guaranteed to fit. DIY Universal Retro-Fit Tapware - If you can change a tap washer, you can install EZYFIX. This tap set is only available in Chrome. Through Bunnings you can see the Special Orders desk and ask for item number 5003882.

Download the below information PDF’s

DISMANTLING YOUR OLD TAPWARE
  • Turn off water at mains.
  • Remove all old  compnents in the wall (hot and cold buttons, handles, bonnets with spindles, jumper valves.
INSTALLING THE NEW EZYFIX TAPS
  • Dis-assemble the new EZYFIX modern lever taps
  • Screw in the ceramic cartridge only to make a water tight seal, tighten as though you are turning off a tap.
  • Pop the fibre washer over the top of the cartridge and screw down the locking nut. It's really important that the locking nut is installed AFTER and seperated from the ceramic cartrigdge. Otherwise you will be unsure of the ceramic cartridge has made a seal against the tap seat in your wall.
  • Now re-dress your tapware in reverse order of dis-assembly.
THE NEW EZYFIX SPOUT ASSEMBLY
  • Simply apply thread seal tap to thread sticking out from yoru wall.
  • Wind on your new bath spout.
  • Turn taps off and turn on the water at the mains.
Are you having trouble turning the water off? It's likely that you have missed the crucial locking nut step. View our trouble shooter video for a more detailed explanation. here 
  • Remember you can call us on 1300 399 349 if you need help.
 
Add to basket
Add to wishlist
Lever Kitchen Sink Hob Tap Set
Quick View

Lever Kitchen Sink Hob Tap Set

AUD$179.00

Upgrade your kitchen sink taps with our modern lever tapware.

WELS 5 Star Rating / 5.5 litres per minute / T30648 / 2838.02 Contemporary and durable tapware that’s quick and easy to install This set is ideal for you if you are looking for the convenience offered by single lever mixer taps but don't want the added plumbing costs and expenses. Our 3/4 turn Modern Lever kitchen sink tap set is perfect if you are wanting to replace your old stiff and hard to turn off taps. So smooth and easy to turn off, even with a single finger which is great when you are in the midst of cooking up a storm and have food all over your hands It’s important to know that not all kitchen tap bodies are the same. With all other tapware major pipe work is often required. This is because there is a variance across all the different brands that have been or are still in the market. Our EZYFIX taps will adapt to the old and new taps manufactured by Dorf, Caroma, Irwell and even the old deep seated Donson taps to name but a few. This is because with EZYFIX tapware no pipework is required at all, this is thanks to our innovative adaptors and extenders. Simply unscrew your old taps and screw in our new EZYFIX taps. EZYFIX Guaranteed to fit. DIY Universal Retro-Fit Tapware - If you can change a tap washer, you can install EZYFIX. This tap set is available in Chrome only

Download the below information PDF’s

 
  • DISMANTLING YOUR OLD TAPWARE
    • Turn off water at mains.
    • Remove the sink spout by unscrewing it.
    • Remove all items on top of your sink (hot and cold buttons, handles, bonnets with spindles, jumper valves and any other fixtures but not the actual tap bodies or water pipes).
    INSTALLING THE NEW EZYFIX TAPS
    • First disassemble new EZYFIX taps by undoing the discreet locknut underneath the handle with EZYFIX anti-vandal spanner included.
    • Remove handle, o-ring, circlip, discreet locknut and all other components placing them down in the order removed to make reassembly easier later on.
    • Remove the tap dress flange and then the locking nut. This bit is REALLY important.
    • You should now be left with the cartridge assembly only.
    • Check the cartridge assembly against the old spindle for the correct length. Use the spindle extension to make up the difference if necessary.
    • Fit the new assembly and extension as shown in the diagram.
    • Screw the cartridge assembly into the tap body by hand until it screws up against the seat. Then use a spanner to turn it until firmly secured.
    DO NOT OVERTIGHTEN THE CARTRIDGE
    • Fit the red fibre washer over the cartridge against the face of the tap body. Screw the locking nut on the cartridge assembly until it is firm against the body using a spanner to ensure the locking nut is firmly secured.
    • Screw the tap flange onto the locking nut.
    • Re-install all the handle components in the reverse order of the disassemble process.
    • Re-tighten the discreet locknut underneath the handle.
    THE NEW EZYFIX SPOUT ASSEMBLY
    • Apply teflon tape to the exposed thread left behind by your old spout.
    • Wind on your new EZYFIX Modern Lever Kitchen hob spout
    • Turn taps off and turn the water back on at the mains.
    Are you having trouble turning the water off? It's likely that you have missed the crucial locking nut step. View our trouble shooter video for a more detailed explanation. here 
  • Remember you can call us on 1300 399 349 if you need help.
   
Add to basket
Add to wishlist
Lever Multi-Fit Basin/Sink Tap Set
Quick View

Lever Multi-Fit Basin/Sink Tap Set

AUD$139.00

DIY Universal Retro-Fit Tapware

You would purchase this tap set if you wish to enhance the look of your home with sleek modern lever taps. Offering “smooth-glide” ¾ turn ceramic disc taps this set is ideal if you want to replace your existing taps only on your bench or sink mounted tap set whilst keeping your existing spout. Contemporary and durable tapware that’s quick and easy to install Did you know that not all tapware is interchangeable? With all other tapware this means that major pipe work is often required to remove and replace the old tap bodies and breech piece with those that come with your new taps. However with EZYFIX tapware no pipework is required at all, this is thanks to our innovative adaptors and extenders. Simply unscrew your old taps and screw in our new EZYFIX taps. EZYFIX Guaranteed to fit. This set is stocked in Bunnings, use item number 4850067.

Download the below information PDF’s

DISMANTLING YOUR OLD TAPWARE
  • Turn off water at mains.
  • Remove all items on top of your sink/basin (hot and cold buttons, handles, bonnets with spindles, jumper valves and any other fixtures but not the actual tap bodies or water pipes).
INSTALLING THE NEW EZYFIX TAPS
  • Check the new spindle for the correct length by comparing it with the old spindle you removed. Use the spindle extension to make up the difference if necessary.
  • Fit the new top assembly as shown in the diagram, making sure the fibre washer is positioned underneath the bonnet, and the jumper valve is placed into position.
  • Screw the tap flange onto the bonnet.
  • You can now install your tap handle and hot/cold button.
  • Turn taps off and turn the mains back on
  Are you having trouble turning the water off? It's likely that you have missed the crucial locking nut step. View our trouble shooter video for a more detailed explanation. here  Remember you can call us on 1300 399 349 if you need help.    
Add to basket
Add to wishlist
Lever Wall Sink Kitchen/Laundry Tap Set
Quick View

Lever Wall Sink Kitchen/Laundry Tap Set

AUD$198.50

Upgrade your kitchen or laundry sink taps with our modern lever tapware.

WELS 3 Star Rating / 8 Litres per minute / T30649 / 2840.02 Contemporary and durable tapware that’s quick and easy to install This set is ideal for you if you are looking for the convenience offered by single lever mixer taps but don't want the added plumbing costs and expenses. Our 3/4 turn Modern Lever kitchen or laundry sink tap set is perfect if you are wanting to replace your old stiff and hard to turn off wall taps. So smooth and easy to turn off, even with a single finger which is great when you are multi-tasking with an arms load of washing. It’s important to know that not all kitchen tap bodies are the same. With all other tapware major pipe work is often required. This is because there is a variance across all the different brands that have been or are still in the market. Our EZYFIX taps will adapt to the old and new taps manufactured by Dorf, Caroma, Irwell and even the old deep seated Donson taps to name but a few. This is because with EZYFIX tapware no pipework is required at all, this is thanks to our innovative adaptors and extenders. Simply unscrew your old taps and screw in our new EZYFIX taps. EZYFIX Guaranteed to fit. DIY Universal Retro-Fit Tapware - If you can change a tap washer, you can install EZYFIX. This tap set is available in Chrome only

Download the below information PDF’s

 
  • DISMANTLING YOUR OLD TAPWARE
    • Turn off water at mains.
    • Remove the sink spout by unscrewing it.
    • Remove all items from your wall (hot and cold buttons, handles, bonnets with spindles, jumper valves and any other fixtures but not the actual tap bodies or water pipes).
    • If the tap bodies are recessed too deeply into the wall you may need an EZYFIX tough tube spanner kit.
    INSTALLING THE NEW EZYFIX TAPS
    • First disassemble new EZYFIX taps by undoing the discreet locknut underneath the handle with EZYFIX anti-vandal spanner included.
    • Remove handle, o-ring, circlip, discreet locknut and all other components placing them down in the order removed to make reassembly easier later on.
    • Remove the tap dress flange and then the locking nut. This bit is REALLY important.
    • You should now be left with the cartridge assembly only.
    • Fit the new assembly and extension as shown in the diagram.
    • Screw the cartridge assembly into the tap body by hand until it screws up against the seat. Then use a spanner to turn it until firmly secured.
    DO NOT OVERTIGHTEN THE CARTRIDGE
    • Fit the red fibre washer over the cartridge against the face of the tap body. Screw the locking nut on the cartridge assembly until it is firm against the body using a spanner to ensure the locking nut is firmly secured.
    • Screw the tap flange onto the locking nut.
    • Re-install all the handle components in the reverse order of the disassemble process.
    • Re-tighten the discreet locknut underneath the handle.
    THE NEW EZYFIX SPOUT ASSEMBLY
    • Apply teflon tape to the exposed thread left behind by your old spout.
    • Wind on your new EZYFIX Modern Lever Kitchen hob spout
    • Turn taps off and turn the water back on at the mains.
    Are you having trouble turning the water off? It's likely that you have missed the crucial locking nut step. View our trouble shooter video for a more detailed explanation. here 
  • Remember you can call us on 1300 399 349 if you need help.
WATER RATING    
Add to basket
Add to wishlist
Lever Wall Tap Set
Quick View

Lever Wall Tap Set

AUD$129.00

DIY Universal Retro-Fit Tapware

This set is brilliantly designed to allow for an easy upgrade of any existing wall taps. This includes wall mounted taps for showers, baths or wall sink sets when you don’t need to change the spout. Offering our “Smooth-glide” ¾ turn ceramic disc cartridges EZYFIX Modern Lever provides superior flow and temperature control all wrapped up in a sleek contemporary stlye. Contemporary and durable tapware that’s quick and easy to install Often the plumbing in your wall can be uneven or previous renovations have simply added extra layers of render and tile leaving you with deeply recessed plumbing.. With EZYFIX tapware our black pvc threaded extenders are included in the pack often help to overcome this challenge. Simply unscrew your old taps and screw in our new EZYFIX taps. EZYFIX Guaranteed to fit. This model is stocked at Bunnings, use item number 4850068 Download the below information PDF’s EASILY ADAPTS TO EXISTING PLUMBING IN YOUR WALL DISMANTLING YOUR OLD TAPWARE
  •  Turn off water at mains.
  • Remove tap flange by unscrewing in an anti-clockwise direction.
  • Remove all items above the wall surface, ie. hot & cold buttons, handles, bonnets & spindles and jumper valves.
INSTALLING THE NEW EZYFIX TAPS
  • First disassemble new EZYFIX modern lever taps by undoing the discreet locknut underneath the handle with the EZYFIX anti-vandal spanner included.
  • Remove handle, o-ring, circlip, discreet locknut and all other components placing them down in the order removed to make reassembly easier later on.
  • Remove the tap dress flange and then the locking nut. This bit is REALLY important!
  • You should now be left with the cartridgeassembly only.
  • Fit the new assembly as shown in the diagram.
  • Screw the cartridge assembly into the wall by hand until it screws up against the seat. Then use a spanner to turn it until firmly secured. DO NOT OVERTIGHTEN THE CARTRIDGE
  • Fit the red fibre washer over the cartridge against the face of the wall tap body.
  • Screw the locking nut on the cartridge assembly until it is firm against the wall tap body using a spanner to ensure the locking nut is firmly secured.
  • Screw the tap flange onto the locking nut.
  • Re-install all the handle components in the reverse order of the disassemble process.
  • Re-tighten the discreet locknut underneath the handle.
  • Turn taps off and turn the water back on at the mains.
Are you having trouble turning the water off? It's likely that you have missed the crucial locking nut step. View our trouble shooter video for a more detailed explanation. here 
  • Remember you can call us on 1300 399 349 if you need help.
Add to basket
Add to wishlist
Lever Washing Machine Taps
Quick View

Lever Washing Machine Taps

AUD$129.00

Upgrade your laundry taps with our modern lever tapware.

Complement your new washing machine with the modern minimalist design of Modern Lever. This product is really simple to install in your laundry. Stylish and durable tapware that’s quick and easy to install Simply unscrew your old taps and screw in our new EZYFIX taps. EZYFIX Guaranteed to fit. DIY Universal Retro-Fit Tapware - If you can change a tap washer, you can install EZYFIX. This tap set is only available in Chrome. Download the below information PDF’s  
Add to basket
Add to wishlist
Modern Lever Basin Tap Set 3/4 Turn
Quick View

Modern Lever Basin Tap Set 3/4 Turn

AUD$169.00

Upgrade your bathroom's basin taps with our modern lever tapware.

WELS 5 Star Rating / 5.5 litres per minute / T30647 / 2830.02 Contemporary and durable tapware that’s quick and easy to install It’s important to know that not all basin tap bodies are the same. With all other tapware major pipe work is often required. This is because there is a variance across all the different brands that have been or are still in the market. Our EZYFIX taps will adapt to the old and new taps manufactured by Dorf, Caroma, Irwell and even the old deep seated Donson taps to name but a few. This is because with EZYFIX tapware no pipework is required at all, this is thanks to our innovative adaptors and extenders. Simply unscrew your old taps and screw in our new EZYFIX taps. EZYFIX Guaranteed to fit. DIY Universal Retro-Fit Tapware - If you can change a tap washer, you can install EZYFIX. This tap set is available in Chrome only, Bunnings item number 4850066

Download the below information PDF’s

See the installation instructions below plus view our short video guide here
  • DISMANTLING YOUR OLD TAPWARE
    • Turn off water at mains.
    • Remove the sink/basin spout by undoing the brass or plastic spout fixing nut under your basin, then rotate and pull the spout up.
    • Remove all items on top of your sink/basin (hot and cold buttons, handles, bonnets with spindles, jumper valves and any other fixtures but not the actual tap bodies or water pipes).
    INSTALLING THE NEW EZYFIX TAPS
    • First disassemble new EZYFIX taps by undoing the discreet locknut underneath the handle with EZYFIX anti-vandal spanner included.
    • Remove handle, o-ring, circlip, discreet locknut and all other components placing them down in the order removed to make reassembly easier later on.
    • Remove the tap dress flange and then the locking nut. This bit is REALLY important.
    • You should now be left with the cartridge assembly only.
    • Check the cartridge assembly against the old spindle for the correct length. Use the spindle extension to make up the difference if necessary.
    • Fit the new assembly and extension as shown in the diagram.
    • Screw the cartridge assembly into the tap body by hand until it screws up against the seat. Then use a spanner to turn it until firmly secured.
    DO NOT OVERTIGHTEN THE CARTRIDGE
    • Fit the red fibre washer over the cartridge against the face of the tap body. Screw the locking nut on the cartridge assembly until it is firm against the body using a spanner to ensure the locking nut is firmly secured.
    • Screw the tap flange onto the locking nut.
    • Re-install all the handle components in the reverse order of the disassemble process.
    • Re-tighten the discreet locknut underneath the handle.
    THE NEW EZYFIX SPOUT ASSEMBLY
    • Look at the thread on the end of the old spout neck: pick your new nipple where the long thread is identical, and screw it onto the end of the new spout neck, using thread tape included to make a waterproof seal.
    INSTALLATION
    • Push the new spout assembly onto the existing nipple, using a small amount of soapy water or cooking oil for lubrication. Finally, tighten the new spout assembly to the sink/basin using the brass or plastic spout fixing nut.
    • Turn taps off and turn the water back on at the mains.
    Are you having trouble turning the water off? It's likely that you have missed the crucial locking nut step. View our trouble shooter video for a more detailed explanation. here 
  • Remember you can call us on 1300 399 349 if you need help.
 
Add to basket

Universal taps for every fit and need!

The EZYFIX Modern Lever tapware for your bathroom or laundry is the easiest way to update your home. With a modern style, solid brass construction, 3/4 turn lever offering ‘smooth-glide’ flow and temperate control, you can add your own style to your home. Modern Lever has a three-quarter turn design, which offers you a more precise temperature and water flow control than the common quarter-turn taps on the market. This bathroom tapware is especially beneficial when showering in wintertime. The flow is ideal and you will not have to spend the first five minutes of your shower time adjusting the level to find the perfect temperature. The thought of changing your tapware used to be off-putting, because of the amount of plumbing and ‘behind-the-scenes’ work involved. This is usually the case, because not all tapware is compatible with your existing plumbing, which requires major pipework. However, EZYFIX products are specifically designed to adapt to any existing tapware. Our products are not only easy to install, but also easy to operate.
  • Our Modern Lever tapware range includes: Sink sets, basin sets, multi-fit assemblies, wall assemblies, bath sets, washing machine taps and classic-style tapware.
All you need is a basic tool kit and half an hour of your time.

© EZYFIX Tapware, 2021 | Created by Retail Return Marketing Solutions


Privacy Policy

Home
Shop
0 Wishlist
More
More