Add a Caribbean touch to your bathing experience

The Caribbean wall mounted fixed bath or spa filler offers over 190mm of reach. Providing a 125mm wide sheet of water into your bath, perfect for bubbles. With the modern curved shape adding a look of luxury to your bathroom.

Push-Fit system makes for a simple install

Incorporating the innovative EZYFIX Push-Fit system installation is a breeze. Simply remove your old spout leaving just the plumbing thread sticking out of the wall. Apply thread seal teflon tape. Undo the discreet grub screw on your spout and wind it onto just the end of your plumbing thread. Then pull the spout away from the wall leaving the adaptor on the plumbing thread. Now wind the adaptor all the way onto the plumbing thread. Push your new EZYFIX spout back on and re-tighten the grub screw. Within minutes you can add a WOW factor to your bathroom. See how easy by downloading the installation guide here.  

Replace your old hob mounted spout with a Modern Swivel

Ideal for supply of water to your bath, spa or even a sink. This outlet provides a reach of 268mm from the base to the aerator. Once your bath is full you then have the convenience of being able to swivel the outlet to the side so that it doesn't protrude into your bathing area. Again in filling up your kettle or pots, once done simply swivel away. Installation is a breeze, simply unscrew your old spout, apply teflon and screw on your new EZYFIX swivel bath spout. Importantly our spouts don't use plastic or nylon parts and instead are manufactured in brass which is then chrome plated. The water seal is taken care of with a double o-ring design too. EZYFIX Guaranteed to fit. DIY Universal Retro-Fit Tapware - If you can change a tap washer, you can install EZYFIX. This spout is only available in Chrome.

Download the below information PDF’s

• Warranty Statement

 

THE NEW EZYFIX SPOUT ASSEMBLY

• Simply apply thread seal tap to thread sticking out from yoru wall.
• Wind on your new bath spout.
• Remember you can call us on 1300 399 349 if you need help.

 

All in one bathroom shelf and waterfall spout

The Shelf wall mounted bath or spa filler will provides a stylish and functional addition to your bathing retreat. With over 120mm of reach. Providing a 130mm wide sheet of water into your bath, perfect for bubbles. The shelf is 300mm wide offering plenty of room to rest a couple of glasses of your favorite bubbly on for a fun bathing experience.

Push-Fit system makes for a simple install

Incorporating the innovative EZYFIX Push-Fit system installation is a breeze. Simply remove your old spout leaving just the plumbing thread sticking out of the wall. Apply thread seal teflon tape. Undo the discreet grub screw on your spout and wind it onto just the end of your plumbing thread. Then pull the spout away from the wall leaving the adaptor on the plumbing thread. Now wind the adaptor all the way onto the plumbing thread. The Shelf Spout is also supplied with two brass lugs that are screwed to the wall so as to provide the extra support needed for the solid brass system. Once these are aligned with the rear of the spout and screwed to the wall you can then push your new EZYFIX spout back on and re-tighten the grub screw. Within minutes you can add a WOW factor to your bathroom.